MILK Funnel It shall be suitable for use at the DCS for pouring of milk from producer's milk vessel to milk cans or balance tank. The funnel shall be made out of Stainless Steel AISI 304 sheet 1.2 mm thick. At the funnel's conical bottom, there shall be a removable type Stainless steel 40 mesh strainer for filtering extraneous matter in the milk. The SS filter shall be round in shape and properly fixed at the periphery by SS strip ring. The filter shall be rested in a grooved step in the funnel. The funnel shall be free from any sharp edges or cavity. The welding shall be done by TIG method only. Finish of the surface shall be of minimum of 150 grit. A ring shall be provided on the funnel for hanging it on wall, when not in use. Typical dimensions of the funnel are as mentioned below: Top Diameter :320 mm Bottom Diameter :127 mm +/- 2 mm Height :190 mm +/- 2 mm Strainer Diameter :127 mm +/- 5 mm Material of Construction : AISI 304 Thickness of the sheet :1.2 mm
